Mini Split Line Set Cover To Buy - Reviews
By: Waqas Saeed
"Review Home Products" found this Mini Split Line Set Cover To Buy
The Raymond Line Cover Kit will keep your Mini split line set cover in peak shape. This modular solution is intended to improve the appearance of your final installation while safeguarding critical electrical, refrigerant, and plumbing lines with professional-grade materials manufactured for optimum weather protection. This stylish kit will complete any project flawlessly, whether Mini split line set cover a brand-new or already installed AC, with easy-to-assemble components that may match practically any desired configuration. It may also be utilized for a variety of different indoor and outdoor applications when enclosed protection that is adaptable enough to fit your needs is required.
It comes in a neutral white tint that may be painted or colored to make it more or less obvious, and the straight ducts can be chopped down to an exact length if necessary. The 4-stage adjustability of the Cover Guards is ideal for accommodating various zones Mini split line set cover configurations and allowing the duct to extend from 2 to 4 inches deep. The stay-Clean peel-and-go film enables easy clean-up after installation. Pre-installed free-sliding zip-tie clips move fast and effortlessly to set the zip tie where Mini split line set cover is most needed. Paintable components (see instructions for painting directions). UV stabilized components are tested to temperatures ranging from -4 to 140 degrees Fahrenheit. Under pressure, the Cover Guard components do not release.
In fact, the more pressure applied to the interior walls, the stronger the structure becomes since the pressure encourages the components to lock more closely together. Fittings may be opened and closed as needed, allowing the system to be customized.4 39.125 in. straight tube enclosures, 3 basic couplers, 1x 23.62 in. 360 free flex joint enclosure, 1x line entrance wall hood cover, 1x corner elbow coupler, 1x 90 bend coupler, closing hardware are included in the complete set. Configurable kit conceals and protects refrigerant lines, electrical/communication wiring, and moisture drain lines for practically any brand of micro split and line set size.
Professional-grade materials and workmanship for longer life and a lasting look in the face of UV exposure, tough weather, physical impact, and other factors. Mini split line set cover works with the refrigerant lines of any brand of ductless micro split and may be installed with new units or added to an existing system. If your small split line set is more than 12 feet, you need to get more than one of these sets. This kit is meant to cover a maximum of 15 feet of mini split line set cover, but additional kits may be effortlessly attached if you have longer lines. Customer satisfaction is of the utmost importance.
EAGLE 1 metal mini split line set cover for mini split and central air conditioner
EAGLE 1 Metal Line Set Cover Kit for Mini Split and Central Air Conditioner & Heat Pump (Multiple Sizes and Colors) (6x4, Brown)
High-quality, long-lasting 26-gauge metal AC mini split line set cover. NOT MADE OF PLASTIC. Designed for continuous outdoor exposure. A polished look that is professional for your house or company. Covers and conceals unsightly refrigerator pipes and other components on your exterior walls. Simple to set up. No prior installation expertise is required. Matching fasteners, required tools, and installation instructions are included. You only need a drill. The telescoping design accommodates people up to 9 feet and 6 inches tall. It easily adjusts to your desired length. Need assistance or custom size and length? Company is based in the United States and look forward to helping you.
Elbows and “T” joints are offered to facilitate turns and connections. Simply give us a call or drop us an email with images of your job. . If your mini split line cover is more than 12 feet, you need to get more than one of these sets. Purchase with confidence! Use a permanent cover to protect your HVAC lines. Pre-installed free-sliding zip-tie clips move fast and effortlessly to set the zip tie where mini split line cover. Is most needed. Paintable components (see instructions for painting directions). UV stabilized components are tested to temperatures ranging from -4 to 140 degrees Fahrenheit.
Under pressure, the Cover Guard components do not release. In fact, the more pressure applied to the interior walls, the stronger the structure becomes since the pressure encourages the components to lock more closely together. Fittings may be opened and closed as needed, allowing the system to be customized.4 39.125 in. straight tube enclosures, 3 basic couplers, 1x 23.62 in. 360 free flex joint enclosure, 1x mini split line set cover entrance wall hood cover, 1x corner elbow coupler, 1x 90 bend coupler, closing hardware are included in the complete set.
Reviews & Purchasing Experiences
Ryan Weirich purchased this mini split line set cover and reviewed that “ Fantastic Product and Seller” Reached out to seller about a custom run as I needed a few turns and they immediately responded and were able to create exactly what I needed with just some photos and measurements. Read more..
14 Ft mini split line set cover, Pro Series for mini split air conditioners
4" 14 Ft Line Set Cover Kit Pro Series for Mini Split Air Conditioners and Heat Pumps Decorative Tubing Cover
Typical professional grade for durability and weather resistance tube material allows for simple cut-to-fit installations. 4 are included “: (4)39 “Hide-A-Line Tubing; (1) Wall Cover; (3) Coupler; (1) 90-120° Elbow; (1) End Cap Color – White/Paintable; Hardware Included; Suitable for Central Air Conditioning and mini split line set cover to accommodate most applications are included in the mini split line set cover kit to protect and hide wiring and connection lines for a sleek, polished finish. Application both indoors and outside. Tube material allows for simple cut-to-fit installations. The mini split line set cover kit includes four 39″ tubes, three couplers, one wall cover, one Horizontal Universal 90-120° elbow, and one end cap.
This Homework’s bath fan keeps your house comfortable by silently removing moisture and humidity from the bathroom. This exhaust fan is 1. 5 some at 110 CFM and can handle areas up to 110 square feet. While cleaning the bathroom or toilet, strong chemicals are employed, which might leave an unpleasant stench. With their strong airflow, Homework’s bathroom fans may help eradicate unpleasant stench. With its galvanized steel construction and sophisticated grille design, this grille is designed to be corrosion resistant. With Heat pump cover no-cut design and ceiling mount ventilation, this exhaust bath fan is simple to install.
7-1/2 in (L) x 7-1/4 in (W) x 5-3/4 in (H) with a 4″ circular duct connection. The Mr. Cool Line Guard Line Set Cover also provides a more appealing outside appearance. Many homeowners dislike the sight of exposed refrigerant wires slithering this way and around their property. This package not only protects but also neatens and tidies those same lines. Some homeowner communities even mandate their members to utilize goods like this Mr. Cool line set cover kit to prevent being an eyesore in the neighborhood. This Heat pump cover is universal in addition to functioning well with Mr. Cool ductless mini split refrigerant lines.
Reviews & Purchasing Experiences
Steve M purchased this mini split line set cover and reviewed that “ easy to install” I purchased 2 of these sets. They were sturdier than I expected. In fact, it took a bit of strength to get them to snap together because the plastic is quite thick.
Jeacent 3"W 11.3Ft PVC ac line cover with kit tubing cover for mini split line set cover
Jeacent 3"W 11.3Ft PVC AC Line Set Cover Kit Tubing Cover for Mini Split, Central Air Conditioner, Heat Pump
Keep pipes arranged and exterior walls free for a professional installation look. Durable – shield and conceal the Mini split line set cover, drain hose, and electricity from all-weather elements. Easily fits any prior or current installations. PVC that can be painted (1) Wall Entry Cap; (4) 31″L Straight 3″W; (3) Coupling; (1) 90° Flat Elbow; (1) 90° Elbow; (1) Reducer End Cap; (1) Reducer End Cap Fits most A/C Heat Pump 7,000 – 24,000 BTU. The hardware is included. A US patent is pending. All right is reserved.
It fits together beautifully and does an excellent job of concealing those lines. The complete kit includes covers for most applications to protect wiring and connecting lines for a clean, polished appearance. This is an excellent choice for your mini-split installation since Mini split line set cover protects the line set, wiring, and drainage lines from the elements. Minimize maintenance time, preserve and extend the life of your air conditioner unit with a strong cove line. Are you still removing the covers for the guests? Ac line cover must be exhausting. Our dish covers are completely transparent. They keep dirt out and allow excellent view for your beautiful, protected dishes.
Our chafing dish covers are made of special PVC and have a great resilience to heat and cracking. Even better, they are food-grade certified. Show your care for food sanitation with confidence, without ever doubting the quality. Both sides of the coverings are meant to expand to 90 degrees. You may easily open and close the covers with the comfy grips. Ac line cover is an excellent food cover that will put you at rest during catering occasions. The grooved design incorporates elements that are intended to protect the interior, preventing the cover from falling off. Put your mind at ease and serve clients confidently since the hinges are securely attached and have been tested hundreds of times.
Reviews & Purchasing Experiences
Customer purchased this mini split line set cover and reviewed that “ Good quality” My kit is made of good quality material which is NOT brittle, cuts well on a table saw and looks very nice. The only 1 star rating said it was of “poor quality, cheap and brittle.” Read more…
LILIJIA 3" 17.5Ft mini split line set Cove, Mini split decorative cover kit
LILIJIA 3" 17.5Ft Mini Split Line Set Cover, Decorative PVC Line Set Cover Kit for Air Conditioners and Heat Pumps, with Flexible Duct, Creamy White
Refrigeration pipes exposed to the outdoors may be damaged by the sun, rain, storms, temperature fluctuations, or other factors. PVC Mini split line set cover may appropriately protect the pipes and extend the life of the device. Straight Duct x4, Flexible Duct x1, Flexible Trumpet Duct x1, 90° Flat Elbow x1, 90° Elbow x1, Wall Inlet x1, End Cap x1, Coupler x3. The line set cover is 3-inch wide and covers up to 17.5 ft of pipe. It comes with a complete set of pieces to match the various patterns of the outer wall.
(The flexible trumpet duct is also included in the total.) Straight ducts with a Snap-On construction may be cut freely and immediately attached to flexible ducts without the use of a coupler! Line set cover, whether indoors or outside, can maintain your external wall nice and clean, and mini split decorative cover can also be painted to match the exterior colors. The great toughness and hardness of the 50 ft seamless copper pipes will set your mind at ease by preventing corrosion and ruptures. This mini-split line set includes high and low-pressure lines with 3/8″ and 5/8″ OD and a maximum bearing pressure of 132.3 lbs. You can feel the quality of the material, and you can see the quality of the products.
Cotton with three layers of insulation: Our small split line is shielded by three layers of insulated cotton: embossed polyethylene film, weather-resistant foam, and thicker insulating cotton. Because of its effective heat insulation and ageing resistance, this foam layer operates ideally. You will not be disappointed, no matter what the obstacle. The copper pipe ends are appropriately flared for connection, and the flare fittings are leak-free. Mini split decorative cover includes anti-cracking thicker nuts in standard gauges as well as dust-proof caps. Connect and remain connected for years of continuous and dependable use.
Two 36.1 ft pipe wrapping tapes are thoughtfully supplied with the tiny split line. The installation process is simple. All you have to do is connect the inside unit pipes, wrap them, and then connect the outside unit to have your favorite air conditioner up and running. This copper Mini split line set cover is suitable for most 24000 BTU mini split air conditioners and AC systems that require 3/8″ and 5/8″ connections.
Reviews & Purchasing Experiences
Builder Guy in Days Gone by purchased this mini split line cover and reviewed that “ Have to admit that I’ve been a Mitsubishi man” when it comes to these lineset covers. Their product is hard to beat. However, I have a mini-split that needs to go in – actually, that house probably could use two smaller ones – and this product just happened to show up when I needed to find a cover. Read more…
LyPrem brown 16.5Ft mini split line set cover 4" PVC Line cover kit for mini split
LyPrem Brown 16.5Ft Mini Split Line Set Cover 4" PVC Line Cover Kit for Mini Split and Central Air Conditioner & Heat Pump
Mini split line set cover conceals and conceals unsightly refrigerator pipes on your exterior walls. Keep the pipe work arranged and the external walls free for a professional installation look. Brown PVC plastic substance that is extremely durable. Protect and conceal the line set, drain hose, and electricity from the weather. Mini split line set cover is simple to include into any prior or current system. Fits seamlessly into any prior or current installations. PVC material that can be printed. Among the components were Straight; Hose; Wall Cover; Elbow; Coupling; Screw.
Best appropriate for 7,000 – 24,000 BTU A/C Heat Pump systems. The hardware is included. Covering the line-set looks beautiful without a bunch of cables and lines dangling down a wall and protects it from the elements. Mini split line set cover is also simple to set up. Drill the frame to the exterior wall where the line set connects to the outdoor unit from the inside unit. Screw the frame to the outer wall, and then fasten the line set to the frame with the accompanying zip ties. Secure the top in place, and then simply snap on the remaining components. You may also attach at an angle by using an elbow piece.
For all sales, service, and installation inquiries, a specialized and highly qualified staff of expert engineers, HVAC technicians, and sales professionals is at your disposal. If you need technical assistance at any moment, even during installation, our skilled professionals can offer you the required information and direction. Company has all components and accessories in stock. You can get in touch with our technical assistance. Safeguarding your Mr. Cool micro split line set with a Mini split line set cover kit, such as the Mr. Cool Line Guard, can allow your Mr. Cool ductless unit to run efficiently for many years.
Reviews & Purchasing Experiences
JSC purchased this mini split line cover and reviewed that “ Solid, easy to install, but can discolor over time under sun” Pros: decent price, fairly sturdy, easy enough to install. I used a chalk line to get a straight vertical, then lined it up. Screws are good for siding. Read more…
Frequently Asked Questions (FAQs)
Our painted line set options are made from painted Galvalume. Galvalume is made to be outside permanently. Galvalume is rust resistant. Our copper line sets are made from pure copper. Our stainless steel line sets are made from 304 stainless steel. We make custom sizes and corners right here in the USA. Feel free to ca… see more
The top end has a metal cap. We can provide a cap for the bottom at no additional charge. Just send us a message with your order number and request. There would have to be some field cutting to get the cap around the lines going into the bottom end of the cover. Screen or wire cloth can also be installed around the H… see more
Yes. All the diamond plate options are pure aluminum. We can send you a sample of any of our materials. We also build custom sizes and shapes right here in the USA. Please send us a private message with your request and information through the contact seller tab on Amazon or text at 256-612-1200. Please send pictu… see more
I had the 4″ installed on my 24000 BTU 3 zone unit. It worked but was VERY tight and hard to manage. Took the installer the better part of the day to get it to fit. The elbows were especially tough. Once it was installed it looked great.
You can use any type of outdoor paint. I used a piece of the siding to match the color. It made the covers blend with the siding, which I thought made for a professional looking finish.
You may be using the wrong side against the wall. The wider side should be against the wall, then snap or slide the front side on. I had the same problem at first, so don’t feel bad.
Hi, all the accessories parts included in package has been shown in the picture, in your situation, we are afraid that there isn’t a piece attached could solve your problem to cover the protruding part.
So far we haven’t sold the parts at FBA, we may sell them in the future. We could send the parts of straight pipes for you from China if you need more, but it might cost quite amount of shipment fee and time.
There are none. It’s not too hard to figure out that the straight sections clam-shell together and then fit inside the couplers.
We did a few extra things like drilling extra holes in the straight sections for extra screws to mount to the wall, and a pair of spaced holes on the back that we inserted 10″ zip ties thro… see more
I think you have to purchase another complete set. We had extra pieces but it would have been too costly to ship relative to the total cost